Oracle Technical Interview Questions Answered
Oracle Technical Interview Questions Answered – Part1
The interview process can be quite stressful. Here is the first part of a two part series on helping you answer those tough questions that you might experience in your quest for an Oracle DBA position.
Ever since I wrote the past article on the Oracle Technical Interview, I have been bombarded with e-mails asking for help on getting through the interview questions that I presented. Most of you I have answered, others I was reluctant to post all of the answers so that you could begin your own quest for the answers. Now, however, I have decided to post the answers knowing that we can all benefit from them. If there are any questions here that you still need clarification on, please e-mail me and I will do my best to further explain the answer I have given. Please remember that as you go through the article, it is not enough to know the answer to a particular question, you must try and put yourself in an interview situation and experience answering the question for yourself. Therefore, after you have gone through the questions and answers read the question yourself and then answer it with your own words. As always, good luck, and cheers.
Personal
This part of the interview question is not to be regarded as insignificant. If the interviewer asks you these questions take it as a sign that they are interested in you, your qualities, and how you interact with people throughout the day. Take it as an opportunity to prove that you have been around the block a few times, are willing to work with other people, and enjoy the job you do. Many times people see DBA types as stuffy and pointed, not willing to work with others, and only concerned with the database and its day-to-day operational needs. Put aside the needs of the database and talk about how you work with people and the different departments in the organization and are concerned with providing them with top notch database services.
1. What DBA activities did you to do today?
Wow, this is a loaded question and almost begs for you to answer it with “What DBA activities do you LIKE to do on a daily basis?.” And that is how I would answer this question. Again, do not get caught up in the “typical” day-to-day operational issues of database administration. Sure, you can talk about the index you rebuilt, the monitoring of system and session waits that were occurring, or the space you added to a data file, these are all good and great and you should convey that you understand the day-to-day operational issues. What you should also throw into this answer are the meetings that you attend to provide direction in the database arena, the people that you meet and talk with daily to answer adhoc questions about database use, the modeling of business needs within the database, and the extra time you spend early in the morning or late at night to get the job done. Just because the question stipulates “today” do not take “today” to mean “today.” Make sure you wrap up a few good days into “today” and talk about them. This question also begs you to ask the question of “What typical DBA activities are performed day to day within X Corporation?”
2. What is your typical day like?
If you spend enough time on question 1, this question will never be asked. It is really a continuation of question 1 to try and get you to open up and talk about the type of things you like to do. Personally, I would continue with the theme of question 1 if you are cut short or this question is asked later in the interview process. Just note that this question is not all geared toward the day-to-day operational issues you experience as a DBA. This question also gives you the opportunity to see if they want to know about you as an individual. Since the question did not stipulate “on the job” I would throw in a few items like, I get up at 5:00am to get into work and get some quiet time to read up on new trends or you help coach your son/daughter’s soccer team. Just test the waters to what is acceptable. If the interviewer starts to pull you back to “job” related issues, do not go to personal. Also, if you go to the office of the interviewer please notice the surroundings, if there are pictures of his/her family, it is probably a good idea to venture down the personal path. If there is a fly-fishing picture on the wall, do not say you like deep-sea fishing. You get the picture.
3. What other parts of your organization do you interact with and how?
Again, if you have exhausted question 1 and 2 you may never get to this question. But if you have been apprehensive to opening up and explaining yourself, take note that you may have an issue and the interviewer might also be already getting tired of the interview process. If you get to this question consider yourself in trouble. You really need to forget all your hang-ups and start explaining what it is that you like to do as a DBA, and why you want to work for this particular company. You are going to have to reel this interviewer back into the interview process or you might not get to the true technical question part of the interview.
4. Do you consider yourself a development DBA or a production DBA and why?
I take this as a trick question and explain it that way. Never in my database carrier have I distinguished between “development” and “production.” Just ask your development staff or VP of engineering how much time and money is lost if development systems are down. Explain to the interviewer that both systems are equally important to the operation of the company and both should be considered as production systems because there are people relying on them and money is lost if either one of them is down. Ok you may be saying, and I know you are, that we lose more money if the production system is down. Ok, convey that to the interviewer and you won’t get anyone to disagree with you unless your company sells software or there are million dollar deals on the table that are expecting the next release of your product or service.
5. Are you a nuts-n-bolts DBA or a tools-n-props DBA
This question begs for me to give definition around the terms I basically group DBAs into. These are not good or bad groups but something I like to think about when talking to DBAs. A nuts-n-bolts DBA is the type that likes to figure out every little item about how the database works. He/she is a DBA who typically hates a GUI environment and prefers the command line to execute commands and accomplish tasks. A nuts-n-bolts DBA like to feel in control of the database and only feels comfortable at the command line and vi as an editor. The tools-n-props DBA is mostly the opposite of a nuts-n-bolts DBA, they like the feel of a GUI, the ease at which things can be accomplished without knowing much about the database. They want to get the job done with the least amount of intervention from having to figure out what everything is doing behind the scenes. Now the answer, I would explain myself as a combination of the two. I, having been in this business for over 20 years, have grown up in a command line era where the GUIs never seemed to work. There was high complexity in systems and not much good documentation on how things worked. Thus, I had to learn everything about most aspects of the database environment I was working in and thus became a nuts-n-bolts DBA. I was a true command line and vi bigot. Times have changed and the GUIs are very reliable, understand the environment they are installed on, and can generally get the job done quicker for individuals new to database administration. I too am slowly slipping over to the dark side of GUI administration. If you find yourself as a tools-n-props DBA, try to convey that you are aware of some tasks that require you to be a nuts-n-bolts DBA
Oracle Interview Questions
1. Explain the difference between a hot backup and a cold backup and the benefits associated with each.
A hot backup is basically taking a backup of the database while it is still up and running and it must be in archive log mode. A cold backup is taking a backup of the database while it is shut down and does not require being in archive log mode. The benefit of taking a hot backup is that the database is still available for use while the backup is occurring and you can recover the database to any ball in time. The benefit of taking a cold backup is that it is typically easier to administer the backup and recovery process. In addition, since you are taking cold backups the database does not require being in archive log mode and thus there will be a slight performance gain as the database is not cutting archive logs to disk.
________________________________________
2. You have just had to restore from backup and do not have any control files. How would you go about bringing up this database?
I would create a text based backup control file, stipulating where on disk all the data files where and then issue the recover command with the using backup control file clause.
________________________________________
3. How do you switch from an init.ora file to a spfile?
Issue the create spfile from pfile command.
________________________________________
4. Explain the difference between a data block, an extent and a segment.
A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
________________________________________
5. Give two examples of how you might determine the structure of the table DEPT.
Use the describe command or use the dbms_metadata.get_ddl package.
________________________________________
6. Where would you look for errors from the database engine?
In the alert log.
7. Compare and contrast TRUNCATE and DELETE for a table.
Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces a now rollback. The delete command, on the other hand, is a DML operation, which will produce a rollback and thus take longer to complete.
________________________________________
8. Give the reasoning behind using an index.
Faster access to data blocks in a table.
________________________________________
9. Give the two types of tables involved in producing a star schema and the type of data they hold.
Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.
________________________________________
10. What type of index should you use on a fact table?
A Bitmap index.
________________________________________
11. Give two examples of referential integrity constraints.
A primary key and a foreign key.
________________________________________
12. A table is classified as a parent table and you want to drop and re-create it. How would you do this without affecting the children tables?
Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.
________________________________________
13. Explain the difference between ARCHIVELOG mode and NOARCHIVELOG mode and the benefits and disadvantages to each.
ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any ball in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any ball in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.
________________________________________
14. What command would you use to create a backup control file?
Alter database backup control file to trace.
________________________________________
15. Give the stages of instance startup to a usable state where normal users may access it.
STARTUP NOMOUNT – Instance startup
STARTUP MOUNT – The database is mounted
STARTUP OPEN – The database is opened
16. What column differentiates the V$ views to the GV$ views and how?
The INST_ID column which indicates the instance in a RAC environment the information came from.
________________________________________
17. How would you go about generating an EXPLAIN plan?
Create a plan table with utlxplan.sql.
Use the explain plan set statement_id = ‘tst1’ into plan_table for a SQL statement
Look at the explain plan with utlxplp.sql or utlxpls.sql
________________________________________
18. How would you go about increasing the buffer cache hit ratio?
Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.
________________________________________
19. Explain an ORA-01555
You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.
________________________________________
20. Explain the difference between $ORACLE_HOME and $ORACLE_BASE.
ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.
1. Describe the difference between a procedure, function and anonymous pl/sql block.
Candidate should mention use of DECLARE statement, a function must return a value while a procedure doesn?t have to.
________________________________________
2. What is a mutating table error and how can you get around it?
This happens with triggers. It occurs because the trigger is trying to update a row it is currently using. The usual fix involves either use of views or temporary tables so the database is selecting from one while updating the other.
________________________________________
3. Describe the use of %ROWTYPE and %TYPE in PL/SQL
Expected answer: %ROWTYPE allows you to associate a variable with an entire table row. The %TYPE associates a variable with a single column type.
________________________________________
4. 4What packages (if any) has Oracle provided for use by developers?
Expected answer: Oracle provides the DBMS_ series of packages. There are many which developers should be aware of such as DBMS_SQL, DBMS_PIPE, DBMS_TRANSACTION, DBMS_LOCK, DBMS_ALERT, DBMS_OUTPUT, DBMS_JOB, DBMS_UTILITY, DBMS_DDL, UTL_FILE. If they can mention a few of these and describe how they used them, even better. If they include the SQL routines provided by Oracle, great, but not really what was asked.
________________________________________
5. Describe the use of PL/SQL tables
Expected answer: PL/SQL tables are scalar arrays that can be referenced by a binary integer. They can be used to hold values for use in later queries or calculations. In Oracle 8 they will be able to be of the %ROWTYPE designation, or RECORD.
________________________________________
6. When is a declare statement needed ?
The DECLARE statement is used in PL/SQL anonymous blocks such as with stand alone, non-stored PL/SQL procedures. It must come first in a PL/SQL stand alone file if it is used.
________________________________________
7. In what order should a open/fetch/loop set of commands in a PL/SQL block be implemented if you use the %NOTFOUND cursor variable in the exit when statement? Why?
Expected answer: OPEN then FETCH then LOOP followed by the exit when. If not specified in this order will result in the final return being done twice because of the way the %NOTFOUND is handled by PL/SQL.
________________________________________
8. What are SQLCODE and SQLERRM and why are they important for PL/SQL developers?
Expected answer: SQLCODE returns the value of the error number for the last error encountered. The SQLERRM returns the actual error message for the last error encountered. They can be used in exception handling to report, or, store in an error log table, the error that occurred in the code. These are especially useful for the WHEN OTHERS exception.
________________________________________
9. How can you find within a PL/SQL block, if a cursor is open?
Expected answer: Use the %ISOPEN cursor status variable.
________________________________________
10. How can you generate debugging output from PL/SQL?
Expected answer: Use the DBMS_OUTPUT package. Another possible method is to just use the SHOW ERROR command, but this only shows errors. The DBMS_OUTPUT package can be used to show intermediate results from loops and the status of variables as the procedure is executed. The new package UTL_FILE can also be used.
________________________________________
11. What are the types of triggers?
Expected Answer: There are 12 types of triggers in PL/SQL that consist of combinations of the BEFORE, AFTER, ROW, TABLE, INSERT, UPDATE, DELETE and ALL key words:
BEFORE ALL ROW INSERT
AFTER ALL ROW INSERT
BEFORE INSERT
AFTER INSERT etc.
1. Give one method for transferring a table from one schema to another:
There are several possible methods, export-import, CREATE TABLE… AS SELECT, or COPY.
________________________________________
2. What is the purpose of the IMPORT option IGNORE? What is it?s default setting
The IMPORT IGNORE option tells import to ignore “already exists” errors. If it is not specified the tables that already exist will be skipped. If it is specified, the error is ignored and the tables data will be inserted. The default value is N.
________________________________________
3. You have a rollback segment in a version 7.2 database that has expanded beyond optimal, how can it be restored to optimal
Use the ALTER TABLESPACE ….. SHRINK command.
________________________________________
4. If the DEFAULT and TEMPORARY tablespace clauses are left out of a CREATE USER command what happens? Is this bad or good? Why
The user is assigned the SYSTEM tablespace as a default and temporary tablespace. This is bad because it causes user objects and temporary segments to be placed into the SYSTEM tablespace resulting in fragmentation and improper table placement (only data dictionary objects and the system rollback segment should be in SYSTEM).
________________________________________
5. What are some of the Oracle provided packages that DBAs should be aware of
Oracle provides a number of packages in the form of the DBMS_ packages owned by the SYS user. The packages used by DBAs may include: DBMS_SHARED_POOL, DBMS_UTILITY, DBMS_SQL, DBMS_DDL, DBMS_SESSION, DBMS_OUTPUT and DBMS_SNAPSHOT. They may also try to answer with the UTL*.SQL or CAT*.SQL series of SQL procedures. These can be viewed as extra credit but aren?t part of the answer.
________________________________________
6. What happens if the constraint name is left out of a constraint clause
The Oracle system will use the default name of SYS_Cxxxx where xxxx is a system generated number. This is bad since it makes tracking which table the constraint belongs to or what the constraint does harder.
________________________________________
7. What happens if a tablespace clause is left off of a primary key constraint clause
This results in the index that is automatically generated being placed in then users default tablespace. Since this will usually be the same tablespace as the table is being created in, this can cause serious performance problems.
________________________________________
8. What is the proper method for disabling and re-enabling a primary key constraint
You use the ALTER TABLE command for both. However, for the enable clause you must specify the USING INDEX and TABLESPACE clause for primary keys.
________________________________________
9. What happens if a primary key constraint is disabled and then enabled without fully specifying the index clause
The index is created in the user?s default tablespace and all sizing information is lost. Oracle doesn?t store this information as a part of the constraint definition, but only as part of the index definition, when the constraint was disabled the index was dropped and the information is gone.
________________________________________
10. (On UNIX) When should more than one DB writer process be used? How many should be used
If the UNIX system being used is capable of asynchronous IO then only one is required, if the system is not capable of asynchronous IO then up to twice the number of disks used by Oracle number of DB writers should be specified by use of the db_writers initialization parameter.
________________________________________
11. You are using hot backup without being in archivelog mode, can you recover in the event of a failure? Why or why not
You can?t use hot backup without being in archivelog mode. So no, you couldn?t recover.
________________________________________
12. What causes the “snapshot too old” error? How can this be prevented or mitigated
This is caused by large or long running transactions that have either wrapped onto their own rollback space or have had another transaction write on part of their rollback space. This can be prevented or mitigated by breaking the transaction into a set of smaller transactions or increasing the size of the rollback segments and their extents.
________________________________________
13. How can you tell if a database object is invalid
By checking the status column of the DBA_, ALL_ or USER_OBJECTS views, depending upon whether you own or only have permission on the view or are using a DBA account.
________________________________________
13. A user is getting an ORA-00942 error yet you know you have granted them permission on the table, what else should you check
You need to check that the user has specified the full name of the object (select empid from scott.emp; instead of select empid from emp;) or has a synonym that balls to the object (create synonym emp for scott.emp;)
________________________________________
14. A developer is trying to create a view and the database won?t let him. He has the “DEVELOPER” role which has the “CREATE VIEW” system privilege and SELECT grants on the tables he is using, what is the problem
You need to verify the developer has direct grants on all tables used in the view. You can?t create a stored object with grants given through views.
________________________________________
15. If you have an example table, what is the best way to get sizing data for the production table implementation
The best way is to analyze the table and then use the data provided in the DBA_TABLES view to get the average row length and other pertinent data for the calculation. The quick and dirty way is to look at the number of blocks the table is actually using and ratio the number of rows in the table to its number of blocks against the number of expected rows.
________________________________________
16. How can you find out how many users are currently logged into the database? How can you find their operating system id
There are several ways. One is to look at the v$session or v$process views. Another way is to check the current_logins parameter in the v$sysstat view. Another if you are on UNIX is to do a “ps -ef|grep oracle|wc -l? command, but this only works against a single instance installation.
________________________________________
17. A user selects from a sequence and gets back two values, his select is:
SELECT pk_seq.nextval FROM dual;What is the problem
Somehow two values have been inserted into the dual table. This table is a single row, single column table that should only have one value in it.
________________________________________
18. How can you determine if an index needs to be dropped and rebuilt
Run the ANALYZE INDEX command on the index to validate its structure and then calculate the ratio of LF_BLK_LEN/LF_BLK_LEN+BR_BLK_LEN and if it isn?t near 1.0 (i.e. greater than 0.7 or so) then the index should be rebuilt. Or if the ratio
BR_BLK_LEN/ LF_BLK_LEN+BR_BLK_LEN is nearing 0.3
1. How can variables be passed to a SQL routine
By use of the & symbol. For passing in variables the numbers 1-8 can be used (&1, &2,…,& to pass the values after the command into the SQLPLUS session. To be prompted for a specific variable, place the ampersanded variable in the code itself:
“select * from dba_tables where owner=&owner_name;” . Use of double ampersands tells SQLPLUS to resubstitute the value for each subsequent use of the variable, a single ampersand will cause a reprompt for the value unless an ACCEPT statement is used to get the value from the user.
________________________________________
2. You want to include a carriage return/linefeed in your output from a SQL script, how can you do this
The best method is to use the CHR() function (CHR(10) is a return/linefeed) and the concatenation function “||”. Another method, although it is hard to document and isn?t always portable is to use the return/linefeed as a part of a quoted string.
________________________________________
3. How can you call a PL/SQL procedure from SQL
By use of the EXECUTE (short form EXEC) command.
________________________________________
4. How do you execute a host operating system command from within SQL
By use of the exclamation ball “!” (in UNIX and some other OS) or the HOST (HO) command.
________________________________________
5. You want to use SQL to build SQL, what is this called and give an example
This is called dynamic SQL. An example would be:
set lines 90 pages 0 termout off feedback off verify off
spool drop_all.sql
select ?drop user ?||username||? cascade;? from dba_users
where username not in (“SYS?,?SYSTEM?);
spool off
Essentially you are looking to see that they know to include a command (in this case DROP USER…CASCADE;) and that you need to concatenate using the ?||? the values selected from the database.
________________________________________
6. What SQLPlus command is used to format output from a select
This is best done with the COLUMN command.
________________________________________
7. You want to group the following set of select returns, what can you group on
Max(sum_of_cost), min(sum_of_cost), count(item_no), item_no
The only column that can be grouped on is the “item_no” column, the rest have aggregate functions associated with them.
________________________________________
8. What special Oracle feature allows you to specify how the cost based system treats a SQL statement
The COST based system allows the use of HINTs to control the optimizer path selection. If they can give some example hints such as FIRST ROWS, ALL ROWS, USING INDEX, STAR, even better.
________________________________________
9. You want to determine the location of identical rows in a table before attempting to place a unique index on the table, how can this be done
Oracle tables always have one guaranteed unique column, the rowid column. If you use a min/max function against your rowid and then select against the proposed primary key you can squeeze out the rowids of the duplicate rows pretty quick. For example:
select rowid from emp e
where e.rowid > (select min(x.rowid)
from emp x
where x.emp_no = e.emp_no);
In the situation where multiple columns make up the proposed key, they must all be used in the where clause.
________________________________________
10. What is a Cartesian product
A Cartesian product is the result of an unrestricted join of two or more tables. The result set of a three table Cartesian product will have x * y * z number of rows where x, y, z correspond to the number of rows in each table involved in the join.
________________________________________
11. You are joining a local and a remote table, the network manager complains about the traffic involved, how can you reduce the network traffic
Push the processing of the remote data to the remote instance by using a view to pre-select the information for the join. This will result in only the data required for the join being sent across.
________________________________________
11. What is the default ordering of an ORDER BY clause in a SELECT statement
Ascending
________________________________________
12. What is tkprof and how is it used
The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
________________________________________
13. What is explain plan and how is it used
The EXPLAIN PLAN command is a tool to tune SQL statements. To use it you must have an explain_table generated in the user you are running the explain plan for. This is created using the utlxplan.sql script. Once the explain plan table exists you run the explain plan command giving as its argument the SQL statement to be explained. The explain_plan table is then queried to see the execution plan of the statement. Explain plans can also be run using tkprof.
________________________________________
14. How do you set the number of lines on a page of output? The width
The SET command in SQLPLUS is used to control the number of lines generated per page and the width of those lines, for example SET PAGESIZE 60 LINESIZE 80 will generate reports that are 60 lines long with a line width of 80 characters. The PAGESIZE and LINESIZE options can be shortened to PAGES and LINES.
________________________________________
15. How do you prevent output from coming to the screen
The SET option TERMOUT controls output to the screen. Setting TERMOUT OFF turns off screen output. This option can be shortened to TERM.
________________________________________
16. How do you prevent Oracle from giving you informational messages during and after a SQL statement execution
The SET options FEEDBACK and VERIFY can be set to OFF.
________________________________________
17. How do you generate file output from SQL
By use of the SPOOL command
1. A tablespace has a table with 30 extents in it. Is this bad? Why or why not.
Multiple extents in and of themselves aren?t bad. However if you also have chained rows this can hurt performance.
________________________________________
2. How do you set up tablespaces during an Oracle installation?
You should always attempt to use the Oracle Flexible Architecture standard or another partitioning scheme to ensure proper separation of SYSTEM, ROLLBACK, REDO LOG, DATA, TEMPORARY and INDEX segments.
________________________________________
3. You see multiple fragments in the SYSTEM tablespace, what should you check first?
Ensure that users don?t have the SYSTEM tablespace as their TEMPORARY or DEFAULT tablespace assignment by checking the DBA_USERS view.
________________________________________
4. What are some indications that you need to increase the SHARED_POOL_SIZE parameter?
Poor data dictionary or library cache hit ratios, getting error ORA-04031. Another indication is steadily decreasing performance with all other tuning parameters the same.
________________________________________
5. What is the general guideline for sizing db_block_size and db_multi_block_read for an application that does many full table scans?
Oracle almost always reads in 64k chunks. The two should have a product equal to 64 or a multiple of 64.
________________________________________
6. What is the fastest query method for a table
Fetch by rowid
________________________________________
7. Explain the use of TKPROF? What initialization parameter should be turned on to get full TKPROF output?
The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
________________________________________
8. When looking at v$sysstat you see that sorts (disk) is high. Is this bad or good? If bad -How do you correct it?
If you get excessive disk sorts this is bad. This indicates you need to tune the sort area parameters in the initialization files. The major sort are parameter is the SORT_AREA_SIZe parameter.
________________________________________
9. When should you increase copy latches? What parameters control copy latches
When you get excessive contention for the copy latches as shown by the “redo copy” latch hit ratio. You can increase copy latches via the initialization parameter LOG_SIMULTANEOUS_COPIES to twice the number of CPUs on your system.
________________________________________
10. Where can you get a list of all initialization parameters for your instance? How about an indication if they are default settings or have been changed
You can look in the init.ora file for an indication of manually set parameters. For all parameters, their value and whether or not the current value is the default value, look in the v$parameter view.
________________________________________
11. Describe hit ratio as it pertains to the database buffers. What is the difference between instantaneous and cumulative hit ratio and which should be used for tuning
The hit ratio is a measure of how many times the database was able to read a value from the buffers verses how many times it had to re-read a data value from the disks. A value greater than 80-90% is good, less could indicate problems. If you simply take the ratio of existing parameters this will be a cumulative value since the database started. If you do a comparison between pairs of readings based on some arbitrary time span, this is the instantaneous ratio for that time span. Generally speaking an instantaneous reading gives more valuable data since it will tell you what your instance is doing for the time it was generated over.
________________________________________
12. Discuss row chaining, how does it happen? How can you reduce it? How do you correct it
Row chaining occurs when a VARCHAR2 value is updated and the length of the new value is longer than the old value and won?t fit in the remaining block space. This results in the row chaining to another block. It can be reduced by setting the storage parameters on the table to appropriate values. It can be corrected by export and import of the effected table.
________________________________________
13. When looking at the estat events report you see that you are getting busy buffer waits. Is this bad? How can you find what is causing it
Buffer busy waits could indicate contention in redo, rollback or data blocks. You need to check the v$waitstat view to see what areas are causing the problem. The value of the “count” column tells where the problem is, the “class” column tells you with what. UNDO is rollback segments, DATA is data base buffers.
________________________________________
14. If you see contention for library caches how can you fix it
Increase the size of the shared pool.
________________________________________
15. If you see statistics that deal with “undo” what are they really talking about
Rollback segments and associated structures.
________________________________________
16. If a tablespace has a default pctincrease of zero what will this cause (in relationship to the smon process)
The SMON process won?t automatically coalesce its free space fragments.
________________________________________
17. If a tablespace shows excessive fragmentation what are some methods to defragment the tablespace? (7.1,7.2 and 7.3 only)
In Oracle 7.0 to 7.2 The use of the ‘alter session set events ‘immediate trace name coalesce level ts#’;? command is the easiest way to defragment contiguous free space fragmentation. The ts# parameter corresponds to the ts# value found in the ts$ SYS table. In version 7.3 the ?alter tablespace coalesce;? is best. If the free space isn?t contiguous then export, drop and import of the tablespace contents may be the only way to reclaim non-contiguous free space.
________________________________________
18. How can you tell if a tablespace has excessive fragmentation
If a select against the dba_free_space table shows that the count of a tablespaces extents is greater than the count of its data files, then it is fragmented.
________________________________________
19. You see the following on a status report:
redo log space requests 23
redo log space wait time 0
Is this something to worry about? What if redo log space wait time is high? How can you fix this
Since the wait time is zero, no. If the wait time was high it might indicate a need for more or larger redo logs.
________________________________________
20. What can cause a high value for recursive calls? How can this be fixed
A high value for recursive calls is cause by improper cursor usage, excessive dynamic space management actions, and or excessive statement re-parses. You need to determine the cause and correct it By either relinking applications to hold cursors, use proper space management techniques (proper storage and sizing) or ensure repeat queries are placed in packages for proper reuse.
________________________________________
21. If you see a pin hit ratio of less than 0.8 in the estat library cache report is this a problem? If so, how do you fix it
This indicate that the shared pool may be too small. Increase the shared pool size.
________________________________________
22. If you see the value for reloads is high in the estat library cache report is this a matter for concern
Yes, you should strive for zero reloads if possible. If you see excessive reloads then increase the size of the shared pool.
________________________________________
23. You look at the dba_rollback_segs view and see that there is a large number of shrinks and they are of relatively small size, is this a problem? How can it be fixed if it is a problem
A large number of small shrinks indicates a need to increase the size of the rollback segment extents. Ideally you should have no shrinks or a small number of large shrinks. To fix this just increase the size of the extents and adjust optimal accordingly.
________________________________________
24. You look at the dba_rollback_segs view and see that you have a large number of wraps is this a problem
A large number of wraps indicates that your extent size for your rollback segments are probably too small. Increase the size of your extents to reduce the number of wraps. You can look at the average transaction size in the same view to get the information on transaction size.
________________________________________
25. In a system with an average of 40 concurrent users you get the following from a query on rollback extents:
ROLLBACK CUR EXTENTS
——————— ————————–
R01 11
R02 8
R03 12
R04 9
SYSTEM 4
26. You have room for each to grow by 20 more extents each. Is there a problem? Should you take any action
No there is not a problem. You have 40 extents showing and an average of 40 concurrent users. Since there is plenty of room to grow no action is needed.
________________________________________
27. You see multiple extents in the temporary tablespace. Is this a problem
As long as they are all the same size this isn?t a problem. In fact, it can even improve performance since Oracle won?t have to create a new extent when a user needs one.
________________________________________
28. Define OFA.
OFA stands for Optimal Flexible Architecture. It is a method of placing directories and files in an Oracle system so that you get the maximum flexibility for future tuning and file placement.
________________________________________
29. How do you set up your tablespace on installation
The answer here should show an understanding of separation of redo and rollback, data and indexes and isolation os SYSTEM tables from other tables. An example would be to specify that at least 7 disks should be used for an Oracle installation so that you can place SYSTEM tablespace on one, redo logs on two (mirrored redo logs) the TEMPORARY tablespace on another, ROLLBACK tablespace on another and still have two for DATA and INDEXES. They should indicate how they will handle archive logs and exports as well. As long as they have a logical plan for combining or further separation more or less disks can be specified.
________________________________________
30. What should be done prior to installing Oracle (for the OS and the disks)
adjust kernel parameters or OS tuning parameters in accordance with installation guide. Be sure enough contiguous disk space is available.
________________________________________
31. You have installed Oracle and you are now setting up the actual instance. You have been waiting an hour for the initialization script to finish, what should you check first to determine if there is a problem
Check to make sure that the archiver isn?t stuck. If archive logging is turned on during install a large number of logs will be created. This can fill up your archive log destination causing Oracle to stop to wait for more space.
________________________________________
32. When configuring SQLNET on the server what files must be set up
INITIALIZATION file, TNSNAMES.ORA file, SQLNET.ORA file
________________________________________
33. When configuring SQLNET on the client what files need to be set up
SQLNET.ORA, TNSNAMES.ORA
________________________________________
34. What must be installed with ODBC on the client in order for it to work with Oracle
SQLNET and PROTOCOL (for example: TCPIP adapter) layers of the transport programs.
________________________________________
35. You have just started a new instance with a large SGA on a busy existing server. Performance is terrible, what should you check for
The first thing to check with a large SGA is that it isn?t being swapped out.
________________________________________
36. What OS user should be used for the first part of an Oracle installation (on UNIX)
You must use root first.
________________________________________
37. When should the default values for Oracle initialization parameters be used as is
Never
________________________________________
38. How many control files should you have? Where should they be located
At least 2 on separate disk spindles. Be sure they say on separate disks, not just file systems.
________________________________________
39. How many redo logs should you have and how should they be configured for maximum recoverability
You should have at least three groups of two redo logs with the two logs each on a separate disk spindle (mirrored by Oracle). The redo logs should not be on raw devices on UNIX if it can be avoided.
________________________________________
40. You have a simple application with no “hot” tables (i.e. uniform IO and access requirements). How many disks should you have assuming standard layout for SYSTEM, USER, TEMP and ROLLBACK tablespaces
At least 7, see disk configuration answer above.
________________________________________
41. Describe third normal form
Something like: In third normal form all attributes in an entity are related to the primary key and only to the primary key
________________________________________
42. Is the following statement true or false:
“All relational databases must be in third normal form”
False. While 3NF is good for logical design most databases, if they have more than just a few tables, will not perform well using full 3NF. Usually some entities will be denormalized in the logical to physical transfer process.
________________________________________
43. What is an ERD
An ERD is an Entity-Relationship-Diagram. It is used to show the entities and relationships for a database logical model.
________________________________________
44. Why are recursive relationships bad? How do you resolve them
A recursive relationship (one where a table relates to itself) is bad when it is a hard relationship (i.e. neither side is a “may” both are “must”) as this can result in it not being possible to put in a top or perhaps a bottom of the table (for example in the EMPLOYEE table you couldn?t put in the PRESIDENT of the company because he has no boss, or the junior janitor because he has no subordinates). These type of relationships are usually resolved by adding a small intersection entity.
________________________________________
45. What does a hard one-to-one relationship mean (one where the relationship on both ends is “must”)
Expected answer: This means the two entities should probably be made into one entity.
________________________________________
46. How should a many-to-many relationship be handled
By adding an intersection entity table
________________________________________
47. What is an artificial (derived) primary key? When should an artificial (or derived) primary key be used
A derived key comes from a sequence. Usually it is used when a concatenated key becomes too cumbersome to use as a foreign key.
________________________________________
48. When should you consider denormalization
Whenever performance analysis indicates it would be beneficial to do so without compromising data integrity.
________________________________________
49. How can you determine if an Oracle instance is up from the operating system level
There are several base Oracle processes that will be running on multi-user operating systems, these will be smon, pmon, dbwr and lgwr. Any answer that has them using their operating system process showing feature to check for these is acceptable. For example, on UNIX a ps -ef|grep dbwr will show what instances are up.
________________________________________
50. Users from the PC clients are getting messages indicating :
ORA-06114: (Cnct err, can’t get err txt. See Servr Msgs & Codes Manual)
________________________________________
What could the problem be
The instance name is probably incorrect in their connection string.
________________________________________
51. Users from the PC clients are getting the following error stack:
ERROR: ORA-01034: ORACLE not available
ORA-07318: smsget: open error when opening sgadef.dbf file.
HP-UX Error: 2: No such file or directory
________________________________________
What is the probable cause
The Oracle instance is shutdown that they are trying to access, restart the instance.
________________________________________
52. How can you determine if the SQLNET process is running for SQLNET V1? How about V2
For SQLNET V1 check for the existence of the orasrv process. You can use the command “tcpctl status” to get a full status of the V1 TCPIP server, other protocols have similar command formats. For SQLNET V2 check for the presence of the LISTENER process(s) or you can issue the command “lsnrctl status”.
________________________________________
53. What file will give you Oracle instance status information? Where is it located
The alert.ora log. It is located in the directory specified by the background_dump_dest parameter in the v$parameter table.
________________________________________
54. Users aren?t being allowed on the system. The following message is received:
ORA-00257 archiver is stuck. Connect internal only, until freed
What is the problem
The archive destination is probably full, backup the archive logs and remove them and the archiver will re-start.
________________________________________
55. Where would you look to find out if a redo log was corrupted assuming you are using Oracle mirrored redo logs
There is no message that comes to the SQLDBA or SRVMGR programs during startup in this situation, you must check the alert.log file for this information.
________________________________________
56. You attempt to add a datafile and get:
ORA-01118: cannot add anymore datafiles: limit of 40 exceeded
What is the problem and how can you fix it
When the database was created the db_files parameter in the initialization file was set to 40. You can shutdown and reset this to a higher value, up to the value of MAX_DATAFILES as specified at database creation. If the MAX_DATAFILES is set to low, you will have to rebuild the control file to increase it before proceeding.
________________________________________
57. You look at your fragmentation report and see that smon hasn?t coalesced any of you tablespaces, even though you know several have large chunks of contiguous free extents. What is the problem
Check the dba_tablespaces view for the value of pct_increase for the tablespaces. If pct_increase is zero, smon will not coalesce their free space.
________________________________________
58. Your users get the following error:
ORA-00055 maximum number of DML locks exceeded
What is the problem and how do you fix it
The number of DML Locks is set by the initialization parameter DML_LOCKS. If this value is set to low (which it is by default) you will get this error. Increase the value of DML_LOCKS. If you are sure that this is just a temporary problem, you can have them wait and then try again later and the error should clear.
________________________________________
59. You get a call from you backup DBA while you are on vacation. He has corrupted all of the control files while playing with the ALTER DATABASE BACKUP CONTROLFILE command. What do you do
As long as all datafiles are safe and he was successful with the BACKUP controlfile command you can do the following:
CONNECT INTERNAL
STARTUP MOUNT
(Take any read-only tablespaces offline before next step ALTER DATABASE DATAFILE …. OFFLINE;)
RECOVER DATABASE USING BACKUP CONTROLFILE
ALTER DATABASE OPEN RESETLOGS;
(bring read-only tablespaces back online)
Shutdown and backup the system, then restart
If they have a recent output file from the ALTER DATABASE BACKUP CONTROL FILE TO TRACE; command, they can use that to recover as well.
If no backup of the control file is available then the following will be required:
CONNECT INTERNAL
STARTUP NOMOUNT
CREATE CONTROL FILE …..;
However, they will need to know all of the datafiles, logfiles, and settings for MAXLOGFILES, MAXLOGMEMBERS, MAXLOGHISTORY, MAXDATAFILES for the database to use the command.
1. What is a CO-RELATED SUBQUERY
A CO-RELATED SUBQUERY is one that has a correlation name as table or view designator in the FROM clause of the outer query and the same correlation name as a qualifier of a search condition in the WHERE clause of the subquery.
2. eg
3. SELECT field1 from table1 X
4. WHERE field2>(select avg(field2) from table1 Y
5. where
field1=X.field1);
(The subquery in a correlated subquery is revaluated for every row of the table or view named in the outer query.)
________________________________________
6. What are various joins used while writing SUBQUERIES
Self join-Its a join foreign key of a table references the same table.
Outer Join–Its a join condition used where One can query all the rows of one of the tables in the join condition even though they don’t satisfy the join condition.
Equi-join–Its a join condition that retrieves rows from one or more tables in which one or more columns in one table are equal to one or more columns in the second table.
________________________________________
7. What are various constraints used in SQL
NULL
NOT NULL
CHECK
DEFAULT
________________________________________
8. What are different Oracle database objects
TABLES
VIEWS
INDEXES
SYNONYMS
SEQUENCES
TABLESPACES etc
________________________________________
9. What is difference between Rename and Alias
Rename is a permanent name given to a table or column whereas Alias is a temporary name given to a table or column which do not exist once the SQL statement is executed.
________________________________________
10. What is a view
A view is stored procedure based on one or more tables, its a virtual table.
________________________________________
11. What are various privileges that a user can grant to another user
SELECT
CONNECT
RESOURCE
________________________________________
12. What is difference between UNIQUE and PRIMARY KEY constraints
A table can have only one PRIMARY KEY whereas there can be any number of UNIQUE keys. The columns that compose PK are automatically define NOT NULL, whereas a column that compose a UNIQUE is not automatically defined to be mandatory must also specify the column is NOT NULL.
________________________________________
13. Can a primary key contain more than one columns
Yes
________________________________________
14. How you will avoid duplicating records in a query
By using DISTINCT
________________________________________
15. What is difference between SQL and SQL*PLUS
SQL*PLUS is a command line tool where as SQL and PL/SQL language interface and reporting tool. Its a command line tool that allows user to type SQL commands to be executed directly against an Oracle database. SQL is a language used to query the relational database(DML,DCL,DDL). SQL*PLUS commands are used to format query result, Set options, Edit SQL commands and PL/SQL.
________________________________________
16. Which datatype is used for storing graphics and images
LONG RAW data type is used for storing BLOB’s (binary large objects).
________________________________________
17. How will you delete duplicating rows from a base table
DELETE FROM table_name A WHERE rowid>(SELECT min(rowid) from table_name B where B.table_no=A.table_no);
CREATE TABLE new_table AS SELECT DISTINCT * FROM old_table;
DROP old_table RENAME new_table TO old_table DELETE FROM table_name A WHERE rowid NOT IN (SELECT MAX(ROWID) FROM table_name GROUP BY column_name)
________________________________________
18. What is difference between SUBSTR and INSTR
SUBSTR returns a specified portion of a string eg SUBSTR(‘BCDEF’,4) output BCDE INSTR provides character position in which a pattern is found in a string.
eg INSTR(‘ABC-DC-F’,’-‘,2) output 7 (2nd occurence of ‘-‘)
________________________________________
19. There is a string ‘120000 12 0 .125’ ,how you will find the position of the decimal place
INSTR(‘120000 12 0 .125′,1,’.’) output 13
________________________________________
20. There is a ‘%’ sign in one field of a column. What will be the query to find it.
‘\’ Should be used before ‘%’.
________________________________________
21. When you use WHERE clause and when you use HAVING clause
HAVING clause is used when you want to specify a condition for a group function and it is written after GROUP BY clause The WHERE clause is used when you want to specify a condition for columns, single row functions except group functions and it is written before GROUP BY clause if it is used.
________________________________________
22. Which is more faster – IN or EXISTS
EXISTS is more faster than IN because EXISTS returns a Boolean value whereas IN returns a value.
________________________________________
23. What is a OUTER JOIN
Outer Join–Its a join condition used where you can query all the rows of one of the tables in the join condition even though they dont satisfy the join condition.
________________________________________
24. How you will avoid your query from using indexes
SELECT * FROM emp Where emp_no+’ ‘=12345;
i.e you have to concatenate the column name with space within codes in the where condition.
SELECT /*+ FULL(a) */ ename, emp_no from emp where emp_no=1234;
i.e using HINTS
25. What is a pseudo column. Give some examples
It is a column that is not an actual column in the table.
eg USER, UID, SYSDATE, ROWNUM, ROWID, NULL, AND LEVEL.
Suppose customer table is there having different columns like customer no, payments.What will be the query to select top three max payments.
SELECT customer_no, payments from customer C1 WHERE 3<=(SELECT COUNT(*) from customer C2 WHERE C1.payment <= C2.payment)
________________________________________
26. What is the purpose of a cluster.
Oracle does not allow a user to specifically locate tables, since that is a part of the function of the RDBMS. However, for the purpose of increasing performance, oracle allows a developer to create a CLUSTER. A CLUSTER provides a means for storing data from different tables together for faster retrieval than if the table placement were left to the RDBMS.
________________________________________
27. What is a cursor.
Oracle uses work area to execute SQL statements and store processing information PL/SQL construct called a cursor lets you name a work area and access its stored information A cursor is a mechanism used to fetch more than one row in a Pl/SQl block.
________________________________________
28. Difference between an implicit & an explicit cursor.
PL/SQL declares a cursor implicitly for all SQL data manipulation statements, including quries that return only one row. However,queries that return more than one row you must declare an explicit cursor or use a cursor FOR loop.
Explicit cursor is a cursor in which the cursor name is explicitly assigned to a SELECT statement via the CURSOR…IS statement. An implicit cursor is used for all SQL statements Declare, Open, Fetch, Close. An explicit cursors are used to process multirow SELECT statements An implicit cursor is used to process INSERT, UPDATE, DELETE and single row SELECT. .INTO statements.
________________________________________
29. What are cursor attributes
%ROWCOUNT
%NOTFOUND
%FOUND
%ISOPEN
________________________________________
30. What is a cursor for loop.
Cursor For Loop is a loop where oracle implicitly declares a loop variable, the loop index that of the same record type as the cursor’s record.
________________________________________
31. Difference between NO DATA FOUND and %NOTFOUND
NO DATA FOUND is an exception raised only for the SELECT….INTO statements when the where clause of the querydoes not match any rows. When the where clause of the explicit cursor does not match any rows the %NOTFOUND attribute is set to TRUE instead.
________________________________________
32. What a SELECT FOR UPDATE cursor represent.
SELECT……FROM……FOR……UPDATE[OF column-reference][NOWAIT] The processing done in a fetch loop modifies the rows that have been retrieved by the cursor.
A convenient way of modifying the rows is done by a method with two parts: the FOR UPDATE clause in the cursor declaration, WHERE CURRENT OF CLAUSE in an UPDATE or declaration statement.
________________________________________
33. What ‘WHERE CURRENT OF ‘ clause does in a cursor.
34. LOOP
35. SELECT num_credits INTO v_numcredits FROM classes
36. WHERE dept=123 and course=101;
37. UPDATE students
38. SET current_credits=current_credits+v_numcredits
39. WHERE CURRENT OF X;
40. END LOOP
41. COMMIT;
END;
________________________________________
42. What is use of a cursor variable? How it is defined.
A cursor variable is associated with different statements at run time, which can hold different values at run time. Static cursors can only be associated with one run time query. A cursor variable is reference type(like a pointer in C).
Declaring a cursor variable: TYPE type_name IS REF CURSOR RETURN return_type type_name is the name of the reference type,return_type is a record type indicating the types of the select list that will eventually be returned by the cursor variable.
________________________________________
43. What should be the return type for a cursor variable.Can we use a scalar data type as return type.
The return type for a cursor must be a record type.It can be declared explicitly as a user-defined or %ROWTYPE can be used. eg TYPE t_studentsref IS REF CURSOR RETURN students%ROWTYPE
________________________________________
44. How you open and close a cursor variable.Why it is required.
OPEN cursor variable FOR SELECT…Statement CLOSE cursor variable In order to associate a cursor variable with a particular SELECT statement OPEN syntax is used.In order to free the resources used for the query CLOSE statement is used.
________________________________________
45. How you were passing cursor variables in PL/SQL 2.2.
In PL/SQL 2.2 cursor variables cannot be declared in a package.This is because the storage for a cursor variable has to be allocated using Pro*C or OCI with version 2.2,the only means of passing a cursor variable to a PL/SQL block is via bind variable or a procedure parameter.
________________________________________
46. Can cursor variables be stored in PL/SQL tables.If yes how.If not why.
No, a cursor variable points a row which cannot be stored in a two-dimensional PL/SQL table.
________________________________________
47. Difference between procedure and function.
Functions are named PL/SQL blocks that return a value and can be called with arguments procedure a named block that can be called with parameter. A procedure all is a PL/SQL statement by itself, while a Function call is called as part of an expression.
________________________________________
48. What are different modes of parameters used in functions and procedures.
IN
OUT
INOUT
________________________________________
49. What is difference between a formal and an actual parameter
The variables declared in the procedure and which are passed, as arguments are called actual, the parameters in the procedure declaration. Actual parameters contain the values that are passed to a procedure and receive results. Formal parameters are the placeholders for the values of actual parameters
________________________________________
50. Can the default values be assigned to actual parameters.
Yes
________________________________________
51. Can a function take OUT parameters.If not why.
No.A function has to return a value,an OUT parameter cannot return a value.
________________________________________
52. What is syntax for dropping a procedure and a function .Are these operations possible.
53.
54. Drop Procedure procedure_name
55. Drop Function function_name
________________________________________
56. What are ORACLE PRECOMPILERS.
Using ORACLE PRECOMPILERS ,SQL statements and PL/SQL blocks can be contained inside 3GL programs written in C,C++,COBOL,PASCAL, FORTRAN,PL/1 AND ADA.
The Precompilers are known as Pro*C,Pro*Cobol,… This form of PL/SQL is known as embedded pl/sql,the language in which pl/sql is embedded is known as the host language.
The prcompiler translates the embedded SQL and pl/sql ststements into calls to the precompiler runtime library.The output must be compiled and linked with this library to creater an executable.
________________________________________
57. What is OCI. What are its uses.
Oracle Call Interface is a method of accesing database from a 3GL program. Uses–No precompiler is required,PL/SQL blocks are executed like other DML statements.
58. The OCI library provides
59. -functions to parse SQL statemets
60. -bind input variables
61. -bind output variables
62. -execute statements
63. -fetch the results
________________________________________
64. Difference between database triggers and form triggers.
a) Data base trigger(DBT) fires when a DML operation is performed on a data base table.Form trigger(FT) Fires when user presses a key or navigates between fie